Package switchgears PSG К 20 of an inner installation in a metal casing of two-side service with medium switch position complies with GOST 14693-90, IEC 62271-200 and is intended to package.

SERIES КSO 393 VE-20 (КСО 393 ВЭ-20) WITH AN SF-6 CIRCUIT BREAKER Application and designated area Single-end service assembled switchgear cabinets of KSO 393 VE-20 U3 series with vacuum and.

                      Application and designated areas Package switchgears of series KV 205 are intended for operation in three-phase alternating current networks of.

Application and designated areas Package switchgears of series PSG KRU K 10 with inner installation in a metal casing is of two-side service with medium switch position and complies with.

Package switchgear cabinets KRURN-6 are intended for electric energy distribution at voltage 6 kV and frequency 50 Hz for protection of networks with isolated neutral and control of underground trolleys.

Application and designated area Pole-top package transformer substations with poles (hereafter — PPTS) are intended to receive three-phase alternating current with LV of 6-10 kV, transform it and distribute over.

Application and designated area Package transformer substations of outdoor installation PTS 63….630/10 U1 (hereinafter referred to as PTS KTPN) are intended to receive three-phase alternating current with HV of 6-10.

Application and designated area Pole-top package transformer substations (hereinafter – PPTS KTPM) are intended to receive three-phase alternating current with HV of 6-10 kV, transform it and distribute over three-phase four-cable.

Application and designated areas Package transformer substations for urban networks (KTPGS) are intended to receive three-phase alternating current with HV of 6-10 kV, perform its transformation and distribution over three-phase.

Application and designated area Package transformer substations of indoor installation (PTSI) of power PTSI (КТПВ) 250, PTSI (КТПВ) 400, PTSI (КТПВ) 630, PTSI (КТПВ) 1000, PTSI (КТПВ) 1600, PTSI (КТПВ).

Application and designated area Package transformer substations (in a heat-insulated cover) KTPuB of power up to 1600 kV are with one (two) transformer and are intended to receive three-phase alternating.

BKTP – block complete transformer substation of outdoor installation with voltage of 6 (10) /0.4 kV, with power from 25 kVA to 1600 kVA, is used in networks with insulated.

Purpose and scope TU U 31.2-32236309-003 The switchboard panels of the SCHO-90 series are intended for the acquisition of electrical distribution panels with a voltage of 0.4 kV, used for.

Application and designated area PCC panels VRU and UVR depending on type of panel are intended to receive, distribute and account electrical energy of alternating three-phase current with voltage 380/220.

Application and designated area Automatic transfer switch ATS is an inlet device intended to receive and distribute alternating electric current of 0.4 kW with frequency 50 Hz to feed consumers.

Purpose and scope The switchboard panels of the ShchO-90M series are intended for the assembly of switchboards for the distribution of electrical energy with a voltage of 0.4 kV of.

TU U 31.2-32236309-003 Purpose and scope Panels of switchboards of the ShchO-70 series are intended for a complete set of switchboards of distribution of electrical energy with voltage up to.

Application and designated area Automatic condensing units ACU – 0.4 are intended for automatic compensating of reactive power in three-phase alternating current electric circuits with voltage 0.4 kV and frequency 50.

Devices condenser high-voltage UK 10 (UKRM) Installations condenser UK 10 are designed to increase the power factor of electrical installations of industrial enterprises and distribution networks of 6 * 10.

Application and designated area YAKNO cells of outdoor installation are intended to receive and distribute electrical energy of three-phase alternating current with voltage of 6 and 10 kV and industrial.

Vacuum recloser is intended for commutation and protection of overhead lines of three-phase alternating current with frequency 50 Hz and voltage up to 10 kV. Recloser is intended for operative.

Application and designated area Electric power metering control system PKUE-6(10) is intended to account active and reactive energy in air distribution networks of three-phase alternating current with frequency of 50 Hz.

Application and designated area   Single-end service assembled switchgear cabinets of series KSO 298 (200) series are intended to package switchgears of transformer substations and other industrial switching gears with.

Application and designated area Single-end service assembled switchgear cabinets of KSO 207 (200) series are intended to package switchgears of transformer substations and other industrial switching gears with voltage below.

SINGLE-END SERVICE ASSEMBLED SWITCHGEAR CABINETS OF KSO 393VE SERIES WITH AN SF-6 BREAKER Application and designated area Single-end service assembled switchgear cabinets of series KSO 393 VE with vacuum and.

Application and designated area Single-end service assembled switchgear cabinets of KSO 393V series provide for installation of vacuum breakers BB/TEL, Evolis, Siemens 3AH5 in sets with relay protection RТ 40,.

Application and designated area Single-end service assembled switchgear cabinets KSO 204 series 2 provide for installation of vacuum breakers BB TEL, Evolis, Siemens 3AH5 in sets with relay protection RТ.

KSO 298 switchgear cabinets of series 200, lead-in and accounting switchgear cabinets are intended for power supply of consumers with alternating current of voltage 10 kV. KSO 298 switchgear cabinets are.

Application and designated area Ready-to-use single-end service assembled switchgear cabinets KSO 393 (394) of air isolation in a metal casing with installed commutation units for nominal pressure of 6 and 10 kV..

Purpose and scope The cameras are made on the basis of welded structures. The nominal values of the working parameters, the design and the grid of the circuits make it.

Purpose and scope The KV prefabricated chambers are produced instead of the KSO 272, 285 and 266 and KV 2001 chambers, provide for the installation of vacuum switches and are.

Chambers prefabricated unilateral service with air insulation in a metal sheath are designed to work in the RU at a voltage of 10 kV. Features It is completed with a.